The Federal Signal Informer is a commercial grade Tone Alert Receiver (TAR) designed for use in situations that require an emergency alert. The Informer incorporates a large 4” speaker that creates a very loud output for both live voice and audio alerts. The device can be wall mounted or placed on a desktop and comes with a small detached antenna that can be connected to the back of the Informer for optimum signal reception. This rear connection can also be used to connect an alternative antenna that may be situated in a remote location. VHF, UHF, or Low Band frequency models are available and the Informer operates with narrowband channel spacing.
The Spok MAXPage is a stand-alone desktop transmitter for use in small to medium sized paging systems. Adjustable from 2 to 4 watts, the powerful transmitter is capable of covering an area of up to 1 mile. The MAXPage has a durable injection molded housing, contains a numeric keypad with 19 backlit silicon keys, and a 2-line by 16 character backlit LCD display. The transmitter is available in VHF or UHF frequency bands and POCSAG digital or 2-Tone voice coding formats. Messaging capability includes alphanumeric, numeric, tone only, and voice pages, depending upon system configuration.
The Veetronix Tone Alert Receiver is a device for receiving encoded emergency messages and then alerting public safety personnel of the emergency. The receiver has an internal speaker for message output, but other devices like external speaker systems, sirens, and alarms can also be connected. Although the Veetronix is primarily a desktop receiver, it does come with its own mounting hardware for mobile applications. The user can monitor all network traffic or only the messages intended for the receiver through a front-panel Monitor/Tone switch. If programmed tones are received, the receiver will alert in either Monitor or Tone switch position.
The WiPath PDT3000 Paging Data Terminal is a multi-function digital paging device that can be mounted on a wall, in a vehicle, or placed on a desktop to receive and show incoming messages on a large graphical LCD display. The unit itself has the approximate physical dimensions of 9” L by 3.5” H and 2” W while the message display measures about 5” by 1.5”. The sunlight readable LCD displays messages in 8-line format with 40 characters/line, or zooms to a 4-line display with 20 larger characters/line. The PDT3000 has all the features and performance of the WiPath PDR3000 Paging Receiver, and adds the graphical LCD display. The PDT3000 is available in VHF, UHF, or 900 MHz frequency models, comes with either the POCSAG or FLEX coding format, and operates with wideband channel spacing. 40 messages can be stored in memory and 10 of those can be locked and protected from being overwritten if message memory is exceeded.
The WiPath PDR3000 is a multi-purpose Paging Data Receiver that can be used to monitor paging systems and process incoming messages in many different ways. Applications include initiating emergency alerting systems, acting as a paging system repeater, and remote control of devices like LED signs or telemetry instruments. The PDR3000 is the same device as the WiPath PDT3000 Paging Data Terminal, but with no display. The Paging Receiver is available in VHF, UHF, or 900 MHz frequency bands, POCSAG or FLEX coding formats, and wideband channel spacing. The PDR3000 has memory capacity to store up to 40 messages and 10 of those messages can be locked in memory and not automatically erased when message capacity is exceeded. The physical dimensions of the PDR3000 are 9.0”L x 3.7”H x 2.2”W and the receiver has a number of mounting options from which to choose.
The WiPath DA510 is a compact, single-line, multi-color, moving message LED Sign. Meant to be used indoors, the DA510 is single-sided, displays 10 characters/line, and measures about 16” long, 4” high, and 2” wide. Display resolution consists of 7 rows and 60 columns of LED’s. WiPath LED signs have a POCSAG or FLEX paging receiver built into the units and are operational in most paging frequency bands. The sign can be used in a wide range of informational and alerting situations as well as specialized applications like hospital Nurse Call systems.
The WiPath WL740T is an indoor moving message sign with a single line multi-color LED display. The WL740T displays 8 characters/line at 7 x 40 dpi resolution (7 rows and 40 columns of display LED’s) and is approximately 14” long by 4” high. The sign is single sided, is available in either POCSAG or FLEX coding format used by an integrated paging receiver, and is operational in most paging frequency bands. It can be used in any number of operational situations like standard informational displays, emergency alerting, or dispatch center message monitoring.
The WiPath WL780T is a single line, moving message sign with a multi-color LED display designed for use indoors. The sign measures about 16” wide by 4” high and displays 12 characters/line at 7 x 80 dpi resolution. The WL780T is a single-sided sign and is identical to the Wipath WL780DST except for the number of sides. A paging receiver using either POCSAG or FLEX technology is built into the WL780T, making it operational in most paging frequency bands.
The WiPath WL780DST is a single line, moving message LED sign with a multi-color display on both sides. It is identical to the Wipath WL780T model with the exception of having a double-sided display. The sign is about 16 inches long and 4 inches high, has a 7 x 80 dpi resolution (7 rows and 80 columns of multi-color LEDs), and displays 12 characters / line. Designed for indoor use, the sign can be used in a wide range of informational applications and messaging situations. A built-in POCSAG or FLEX receiver allows the sign to be operational on most paging frequency bands and also be deployed on local or wide area paging systems.
The WiPath WL1680T is a 2-line moving message LED sign with a multi-color display. The 1680T is single sided, designed for indoor use, and measures about 26” long by 6” high. The sign has single or double line display capability with 8 larger characters/line displaying for single line messages or 16 smaller characters/line for two line messages. The WL1680T is a shorter version of the WiPath WL16120T LED sign. A paging receiver is built into the 1680T sign and is available in either POSCSAG or FLEX coding formats. The sign is operational in most paging frequency bands and can be deployed in any local or wide area paging system. The 1680T is used in many messaging and informational situations such as dispatch center message monitoring and emergency mass alerting.
The WiPath WL16120T is an indoor moving message sign with a 2-line multi-color LED display. A longer version of the WiPath WL1680T LED sign, the 16120T displays 12 characters/line in single line mode and 24 smaller characters/line in double line mode. The single-sided sign has 16 x 120 dpi resolution, or a display with 16 rows and 120 columns of multi-colored LED’s. The WL16120T is about 39” long and 6” tall, ideal for those messaging situations where a larger visual display would be preferred. A built-in paging receiver is standard with the 16120T in either POCSAG or FLEX coding format. The sign is operational in most paging frequency bands.
The WiPath VL12P1696 is a very large multi-color LED display sign ruggedly designed for outdoor use. The sign features a 2-line display where 10 characters/line are displayed when using a single line font and smaller 20 characters/line when using a double line font. The VL12P1696 has a single sided display, 16 x 96 dpi resolution (16 rows and 96 columns of multi-colored LED’s), and physically measures slightly under 4’ wide and 10” high. A fully integrated POCSAG or FLEX paging receiver allows the sign to be deployed in local or wide area paging networks. The VL12P1696 is operational in most paging frequency bands.